How To Install XXUFNF3 Android 4.4.2 KitKat Update on Galaxy S4 GT-I9500 Using Odin3 Flasher
The Samsung GT-I9500 Galaxy S4 got a new firmware update, The new firmware is XXUFNF3, It is an Official Android 4.4.2 KitKat update, The previous update was XXUFNE7, So in case your Galaxy S4 has the XXUFNE7 version, Or even any older one, Then you can update it to the latest XXUFNF3 firmware update.
This manual update tutorial will be done using Odin3 flasher, And the official firmware update package, It is so easy to install the new firmware update on your Galaxy S4 I9500 by yourself, There are not any complicated steps at all, We explain all the needed steps in a plain way, Just read them and follow the steps one by one.
The XXUFNF3 Android 4.4.2 KitKat Update Details:
Model Code: GT-I9500
Model Name: GALAXY S4
Android OS Version: Android 4.4.2 KitKat
Changelist: 699287
Build date: Fri, 13 Jun 2014 04:40:02 +0000
PDA: I9500XXUFNF3
CSC: I9500OJVFNF3
MODEM: I9500XXUFNC1
Download The Following Files and Programs:
- Odin3 Flasher.
- Samsung Galaxy S4 GT-I9500 USB Driver.
- I9500XXUFNE7 Firmware Update Package, Download the suitable one for your Country and Carrier.
Preparation Steps:
1- Download Odin3 flasher and extract it.
2- Extract the I9500XXUFNE7 Firmware Update Package.
3- Download and install the Samsung Galaxy S4 GT-I9500 USB driver.
4- Restart your Computer.
5- Backup any wanted data on your device.
6- Charge your Galaxy S4 battery to be at 80% minimum.
7- It is better to make Factory Data Reset, That can keep you away from some errors later.
8- Enable USB debugging option.
Installing I9500XXUFNE7 Android 4.4.2 KitKat Firmware on your Galaxy S4 GT-I9500:
1- Turn off your device, And take out its SIM and Memory card.
2- Put your Galaxy S4 into Download Mode.
3- Connect it to your Computer using the USB cable.
4- Wait for a couple of seconds to let your PC recognize the connected device.
5- Run Odin3.exe flasher as Administrator.
6- Make sure that Re-Partition option is not checked.
7- If Odin3 flasher detects your Galaxy S4 correctly, You will see its COM port number 0:[COMxx]
8- Click on AP button and select: I9500XXUFNF3_I9500OJVFNF3_I9500XXUFNC1_HOME.tar.md5
9- Click on Start button, Odin3 will begin to install the new firmware on your Galaxy S4.
10- After the installing is done, Your GT-I9500 will be rebooted automatically.
11- When your device is on again, Disconnect it from your PC.
12- Wait until it is completely on, Then check the new installed firmware.
13- Done, Congratulations, You have installed the new XXUFNE7 firmware version on your Galaxy S4 GT-I9500.
This manual update tutorial will be done using Odin3 flasher, And the official firmware update package, It is so easy to install the new firmware update on your Galaxy S4 I9500 by yourself, There are not any complicated steps at all, We explain all the needed steps in a plain way, Just read them and follow the steps one by one.
The XXUFNF3 Android 4.4.2 KitKat Update Details:
Model Code: GT-I9500
Model Name: GALAXY S4
Android OS Version: Android 4.4.2 KitKat
Changelist: 699287
Build date: Fri, 13 Jun 2014 04:40:02 +0000
PDA: I9500XXUFNF3
CSC: I9500OJVFNF3
MODEM: I9500XXUFNC1
Download The Following Files and Programs:
- Odin3 Flasher.
- Samsung Galaxy S4 GT-I9500 USB Driver.
- I9500XXUFNE7 Firmware Update Package, Download the suitable one for your Country and Carrier.
Preparation Steps:
1- Download Odin3 flasher and extract it.
2- Extract the I9500XXUFNE7 Firmware Update Package.
3- Download and install the Samsung Galaxy S4 GT-I9500 USB driver.
4- Restart your Computer.
5- Backup any wanted data on your device.
6- Charge your Galaxy S4 battery to be at 80% minimum.
7- It is better to make Factory Data Reset, That can keep you away from some errors later.
8- Enable USB debugging option.
Installing I9500XXUFNE7 Android 4.4.2 KitKat Firmware on your Galaxy S4 GT-I9500:
1- Turn off your device, And take out its SIM and Memory card.
2- Put your Galaxy S4 into Download Mode.
3- Connect it to your Computer using the USB cable.
4- Wait for a couple of seconds to let your PC recognize the connected device.
5- Run Odin3.exe flasher as Administrator.
6- Make sure that Re-Partition option is not checked.
7- If Odin3 flasher detects your Galaxy S4 correctly, You will see its COM port number 0:[COMxx]
8- Click on AP button and select: I9500XXUFNF3_I9500OJVFNF3_I9500XXUFNC1_HOME.tar.md5
9- Click on Start button, Odin3 will begin to install the new firmware on your Galaxy S4.
10- After the installing is done, Your GT-I9500 will be rebooted automatically.
11- When your device is on again, Disconnect it from your PC.
12- Wait until it is completely on, Then check the new installed firmware.
13- Done, Congratulations, You have installed the new XXUFNE7 firmware version on your Galaxy S4 GT-I9500.
No comments